The Martin Audio WMX is a compact, high performance flown or ground stacked subwoofer featuring our trademark Hybrid® loading. Primarily intended for use with the W8LM/W8LMD, it shares the same cabinet width and is directly compatible with the W8LM and its flying hardware.
A single long-excursion 18″ (460mm)/ 4″ (100mm) coil driver is front loaded by a hyperbolic horn with an ultra-low flare rate. The rear of the driver is reflex loaded to extend the LF output to below the natural cut-off point of the horn. This Hybrid® technique marries the very high efficiency of horn loading with the extended low frequency response of a reflex enclosure.[/one_last_last]
TYPE | Hybrid® horn and reflex loaded sub-woofer |
FREQUENCY RESPONSE (1) | 35Hz-150Hz ± 3dB, -10dB @ 28Hz |
DRIVERS | 18″ (460mm)/ 4″ (100mm) voice coil, ultra-long excursion, water resistant cone |
RATED POWER (2) | 1000W AES, 4000W peak |
RECOMMENDED AMPLIFIER | MA12K |
SENSITIVITY (3, 6) | 98dB (open space), 104dB (half space) |
MAXIMUM SPL (calculated @ 1m) |
128dB continuous, 134dB peak (open space) 134dB continuous, 140dB peak (half space) |
NOMINAL IMPEDANCE | 8 ohms |
CROSSOVER | 70Hz-150Hz active low pass via DX1.5 or DX2 controller |
ENCLOSURE | Rectangular, multi-laminate birch ply |
FINISH | Textured black paint |
PROTECTIVE GRILLE | Black perforated steel |
CONNECTORS | 2 x Neutrik NL8 |
FITTINGS | Proprietary rigging system Interlocking skids on top & bottom 4 x bar handles 2 x pocket handles Mounting clips for optional lid Top mounted top hat fitting |
DIMENSIONS (inc. wheels) |
(W) 620mm x (H) 620mm x (D) 905mm (1032mm) (W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.6ins) |
WEIGHT | 87kg (191lbs) |
https://martin-audio.com/products/WMX